Snap Lock | Mechanical Lock | Batten Lock | Ag | Radius | Soffit | Wall

Snap Lock Panels

 DMP 100-150 Snap Lock
 The DMP 100-150 standing seam system has a wide variety of applications. The DMP 150 series with it's more water carrying capabilities commonly found on larger commercial applications This series may also be used on equipment screens, mansards and canopies that require open frame systems. Also available in 24 or 26 ga. painted steel, .032 painted aluminum and 16 or 20 oz. architectural copper.

Available Features:
 Stiffening beads
 Pencil ribs
Available sizes:
 Rib Height: 1" & 1 1/2"
 Panel Width: 12"-20"
 Gauges: 24ga, 26ga, .027, .032 Aluminum, 32oz Copper & 26ga Paintgrip
Available Gauge/Colors:
24 ga Color Chart
26 ga Color Chart
 

 DMP 175 Snap Lock
 The DMP 175 SL standing seam system provides a full structural standing seam engineered for a wide variety of use in the commercial roof industry. It's structural performance allows it to be used over large spans up to five feet. Commonly used on pre-manufactured buildings with perlin system, with rigid insulation and pre manufactured truss system with hat channel, as well as plywood substrates.
Concealed clips and fasteners allow for proper expansion and contraction on long panel applications.

Available Features:
 Stiffening beads
 Pencil ribs
Available sizes:
 Rib Height: 1 3/4"
 Panel Width: 12"-22"
 Gauges: 24ga
Available Gauge/Colors:
24 ga Color Chart
 

 DMP HS Snap Lock
 The DMP 150 high seam snap lock standing seam system has a wide variety of applications. The DMP 150 high seam with it's taller seam, adds structural strength and more water carrying capabilities commonly found lite commercial applications, that require and open framing system, for example mansards, canopies, and may also be used for equipment screens. The 150 HS is a great residential system with it's symmetrical seam that allows for an enhanced architectural design for either lite commercial or residential applications.

Available Features:
 Stiffening beads
 Pencil ribs
Available sizes:
 Rib Height: 1 1/2"
 Panel Width: 12"-16"
 Gauges: 24ga, 26ga, .027, .032 Aluminum, 32oz Copper & 26ga Paintgrip
Available Gauge/Colors:
24 ga Color Chart
26 ga Color Chart
 

Mechanical Lock Panels

 DMP 100-150 ML Mechanical Lock
 The DMP 100-150 ML standing seam system has a traditional locking seam which is mechanically locked after installation by a mechanical seamer. The seam can be single locked at 90 degrees or double locked at 180 degrees for enhanced wind load design. Concealed fasteners and a floating clip design allows for greater expansion and contraction. Typical installation is over plywood substrate with 30 lb felt underlayment.
(DMP 150 ML is tested to ASTM 1592)

Available Features:
 Stiffening beads
 Pencil ribs
Available sizes:
 Rib Height: 1" & 1 1/2"
 Panel Width: 12"-24"
 Gauges: 24ga
Available Gauge/Colors:
24 ga Color Chart
26 ga Color Chart
 

 DMP 200 ML Mechanical Lock
 The DMP 200 ML structural mechanical lock system offers the ultimate leak proof and wind uplift capabilities of commercial applications. It's 2" seam height offers very good structural support for wide span applications up to six feet. It can be mechanically seamed at 90 degrees single lock or at a 180 degrees double lock, providing a proven seaming process in conjunction with a floating clip assembly that gives it the ultimate commercial roof system integrity. It is commonly used on mini storage projects, pre manufactured buildings with perlin systems, truss system with hat channel and 22 ga steel deck on ridge installations as well as plywood substrates.

Available Features:
 Stiffening beads
 Pencil ribs
Available sizes:
 Rib Height: 2"
 Panel Width: 12"-24"
 Gauges: 24ga
Available Gauge/Colors:
24 ga Color Chart

 

Batten Lock Panels

 DMP 100-150 Batten Lock
 The DMP 100-150 BC standing seam systems has a distinctly different look that enhances the appearance of typical metal and shingle combinations. Also using concealed fasteners and clips, this system is very popular in the residential accent roof market. It's bi-directional design makes the installation easy for almost any installer. Typical application is over plywood substrates with a 30 lb. felt underlayment. This system also works well on mansards that have inside or outside knuckle deigns, making it a light commercial system as well.

Available sizes:
 Rib Height: 1" & 1 1/2"
 Panel Width: 12"-16"
 Gauges: 24ga, 26ga, .027, .032 Aluminum, 32oz Copper & 26ga Paintgrip
Available Gauge/Colors:
24 ga Color Chart
26 ga Color Chart
 

Ag (Screw Down) Panels

 DMP Agricultural Panel
 The DMP AG panel line provides 26" of coverage with a pleasing low profile. This panel can be used on roof as well as walls, and features an extra stiffening bead at the crest as well as two between the crest.

Available sizes:
 Rib Height: 3/4"
 Panel Width: 36"
 Gauges: 29ga
Available Gauge/Colors:
29 ga Color Chart

 

Radius Panels

 DMP Radius

Available sizes:
 Rib Height: 1 & 1 1/2"
 Panel Width: 12"-16"
 Gauges: 24ga, 26ga, 29ga, .027, .032 Aluminum, 32oz Copper & 26ga Paintgrip
Available Gauge/Colors:
24 ga Color Chart
26 ga Color Chart

Soffit Panels

 DMP 100,150 & 175 Soffit
 The DMP 100, 150, and 175 SFP system are designed for commercial wall, soffit and fascia applications, where a flush appearance is required. Commonly used over a light gauge framing system and a solid wood or metal substrate placed either vertical or horizontal.

Available Features:
 Vented profiles
 Stiffening Ribs
 Clipped or Interlocking Profiles
Available sizes:
 Rib Height: 1/2", 3/4" & 1"
 Panel Width: 12"-16"
 Gauges: 24ga, 26ga, 29ga, .027, .032 Aluminum & 26ga Paintgrip
Available Gauge/Colors:
24 ga Color Chart
26 ga Color Chart

Wall Panels

 

 


Home | Contact Us | Roof Panels | Panel Clips | Trim Packages | Accessories | Portfolio | Color Chart | About Us | Copper Chimney Caps | Conductor Heads | | Custom Panning Tools